Top 10 Motor Oil Vacuum

0
528 reviews analysed

1. TSI Supercool V32 Automotive Accessories, 32. Fluid_Ounces

TSI Supercool V32 Automotive Accessories, 32. Fluid_Ounces

Feature

2. SUPERFASTRACING Oil Fluid Extractor 7L Manual Vacuum Fuel Petrol Pump Transfer Syphon Suction

SUPERFASTRACING Oil Fluid Extractor 7L Manual Vacuum Fuel Petrol Pump Transfer Syphon Suction

Feature

3. 12V 60W Vacuum Transfer Pump Extractor Oil Fluid Diesel Electric Siphon with Hose for Car Boat Motorbike

12V 60W Vacuum Transfer Pump Extractor Oil Fluid Diesel Electric Siphon with Hose for Car Boat Motorbike

Feature

Description

Specification:

Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Pump Diameter: Approx. 4.8cm / 1.89inch
Length: Approx. 14.5cm / 5.7inch
Cable Length: Approx. 30cm / 11.8inch
Clips Length: Approx. 8cm / 3.15inch
Outlet PVC pipe Length:150cm
Nylon pipe Length:100cm
Brass pipe Length:70cm

Package include:

1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe

How to use:
 1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil 
2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean
If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out

Note: If you want to connect this pump to AC power, you will need a power converter.

4. FIRSTINFO 2nd Generation Pneumatic/Manual 6.5 Liter Oil/Fluid Changer Vacuum Extractor Pump w/Hose Storage + 3.5 x 4.5 mm Engine Oil Hose + Dust Cover

FIRSTINFO 2nd Generation Pneumatic/Manual 6.5 Liter Oil/Fluid Changer Vacuum Extractor Pump w/Hose Storage + 3.5 x 4.5 mm Engine Oil Hose + Dust Cover

Feature

5. Oil Change Pump Extractor, 12v 60w Oil Extractor Pump Oil Pump Extractor, Diesel Fluid Scavenge Suction Oil Transfer Pump for Changing Oil, Oil Change Pump for Boat, Tubes, Truck, RV, ATV, Riding Mowe

Oil Change Pump Extractor, 12v 60w Oil Extractor Pump Oil Pump Extractor, Diesel Fluid Scavenge Suction Oil Transfer Pump for Changing Oil, Oil Change Pump for Boat, Tubes, Truck, RV, ATV, Riding Mowe

Feature

Description

EXCELLENT 12V MOTOR OIL DIESEL EXTRACTOR SCAVENGE SUCTION TRANSFER CHANGE PUMP
NO MORE JACKING OF VEHICLES OR REMOVING DRAIN PLUGS.

Works Quickly For Pumping Out Motor Oil
Great value for a simple, low-cost pump for ocassionally transferring automotive fluids such as automatic transmission fluid and differential gear oil.
The oil suction pump extractor worked very well to pump out old fluid and then pump in new fluid in an automatic transmission — much easier than using a manual hand pump.

Best Sucker Of Oil
This electric pump can be used to “draw” and “push” fluids, depending on which side of the pump (input or output) you connect the hose.

Specifications: 
Material: Plastic & Aluminium 
Color: Black, Yellow 
Input Voltage: DC 12V 
Wattage: 60W 
Current: 5A 
Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min 
Diesel Flow Rate: approx. 250L / Hour 
Inlet Hose Length: approx. 155cm/61”
  Inlet Hose Outer Diameter: 6mm/0.236” 
Inlet Hose Inner Diameter: 4mm/0.157” 
Outlet Hose Length: approx. 124.5cm/49” 
Outlet Hose Outer diameter: 12mm/0.472” 
Outlet Hose Inner Diameter: 10mm/0.39” 
Line Length: approx. 71cm/28” 
Package Weight: approx. 1070g 

Package Included: 
1 x oil change pump extractor
1 x Outlet Hose 
1 x Inlet Hose 
2 x Hose Clamps 
2 x Battery Clam

6. DasMarine 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump + Tubes Truck Rv Boat ATV

DasMarine 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump + Tubes Truck Rv Boat ATV

Feature

Description

Specifications:

Material: Plastic & Aluminium
Color: Black, Yellow
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
Diesel Flow Rate: approx. 250L / Hour
Inlet Hose Length: approx. 155cm/61”
Inlet Hose Outer Diameter: 6mm/0.236”
Inlet Hose Inner Diameter: 4mm/0.157”
Outlet Hose Length: approx. 124.5cm/49”
Outlet Hose Outer diameter: 12mm/0.472”
Outlet Hose Inner Diameter: 10mm/0.39”
Line Length: approx. 71cm/28”
Package Weight: approx. 1070g

Package Included:

1 x Pump
1 x Outlet Hose
1 x Inlet Hose
2 x Hose Clamps
2 x Battery Clamps

7. HighFree Oil Change Pump Extractor 12V 60W Oil Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump with Hose for Boat, Tubes, Truck, RV, ATV

HighFree Oil Change Pump Extractor 12V 60W Oil Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump with Hose for Boat, Tubes, Truck, RV, ATV

Feature

Description

➤Specificaiton:
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees)
Flow Rate: approx. 1L / min
Diesel or heating oil: approx 250 L/H
Sound pressure level:70dB(A)

➤Size:
Oil Change Pump Extractor: 14*13cm
Inlet Hose Length: approx. 120cm
Inlet Hose Outer Diameter: 6mm/0.236”
Inlet Hose Inner Diameter: 4mm/0.157”
Outlet Hose Length: approx. 150cm
Outlet Hose Outer diameter: 12mm/0.472”
Outlet Hose Inner Diameter: 10mm/0.39”
Line Length: approx. 71cm/28”

➤Widely use:
Extracting motor oil from your vehicle without Mess & Specialised.
It can be used for your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.

➤Easy Installation:
Place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.
This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.

➤WARNING:
This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
Only pump warm motor-oil(40℃-50℃) do not pump off motor-oil, as long as the motor is running.
We recommend a short break after 10 minutes continuous usage (should not exceed 30 minutes) to allow the unit to cool.

➤Package Included:
1 x Pump
1 x Outlet Hose
1 x Inlet Hose
2 x Hose Clamps
2 x Battery Clamps

8. Lotyes Oil Change Pump Extractor, DC 12V 60W Diesel Fluid Oil Quick Extract Transfer Pump Scavenge Suction Kit for Car, Boat, Motorbike, Truck, RV, ATV and Other Vehicles

Lotyes Oil Change Pump Extractor, DC 12V 60W Diesel Fluid Oil Quick Extract Transfer Pump Scavenge Suction Kit for Car, Boat, Motorbike, Truck, RV, ATV and Other Vehicles

Feature

9. YaeTek Excellent 12v Motor Oil Diesel Extractor Scavenge Suction Transfer Change Pump

YaeTek Excellent 12v Motor Oil Diesel Extractor Scavenge Suction Transfer Change Pump

Feature

Description

Good Quality Motor Oil/ Diesel Transfer Pump Extractor A Great Way To Extract Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment etc

10. Hanperal DC 12V 5L Transfer Pump Extractor Oil Fluid Scavenge Suction Vacuum

Hanperal DC 12V 5L Transfer Pump Extractor Oil Fluid Scavenge Suction Vacuum

Feature

Description

Specification:
Rated Voltage: DC 12V
Rated Power: 60W
Maximum Pressure: Max. 0.8MPA
Maximum Flow: 5L/min
Color: Black
Pump Diameter: Approx. 4.8cm/1.89″
Length: Approx. 14.5cm/5.7″
Outlet pipe size(Dia.*L): Approx. 10mm*137cm
Inlet pipe diameter: Approx. 8mm,6 mm ; Length: Approx. 110cm/43.3″

Package include:
1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe

How to use:
1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.
2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal.
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move;
then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely);
as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean.
5.If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.
Note:
If you want to connect this pump to AC power, you will need a power converter.
Make sure the engine up to operating temperature!

Conclusion

By our suggestions above, we hope that you can found Motor Oil Vacuum for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general