Top 10 50Mm50mm Blow Radial Cooling Fan

Feature

• ✹✹ Power Connection: 2 Pin-ph2.5
• Low noise while cooling the hot end of heatsinks.
• ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
• ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
• ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
• ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!).

Feature

• 5015 Cooling Dual Ball Bearing Blower Fan 24vdc 0.1A~0.15A 50mmx15mm Widely used in humidifier,  3D printers, aromatherapy and other small appliances series
• small heat radiating communication equipment
• military equipment
• intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
• pc cpu server cooling dissipation and so on—Repair Replacement.
• Total Size : 2″ x 2″ x 0.6 ” (L*D*H)
• Outlet Size : 0.8″ x 0.6″(L*W) Cable Length : 20″
• Mounting Spacing : 5.8cm/2.3″
• Weight : 26g
• Advantage: Long Life (50000 hours) at 40 degree and Low Noise, UL TUV approved certification. Warranty: 2 year and lifetime technical support.
• Notice： This product of our company are non-waterproof product, it is strictly prohibited using in the water. Secondly, product operating voltage is DC24V, prohibit overload use. Product working environment is below zero 10 Degrees Celsius to 70 Degrees Celsius Fourthly, please do not dismantle the product privately.
• Package Content : 2 X Dual Ball Bearing Cooling Fan

Feature

Feature

• Brushless DC Blower Fan, best DIY replacement extruder hotend parts for Prusa i3 MK3.
• Size: About 50x50x15mm/ 1.9×1.9×0.59 inch
• Cable Length: about 750mm/ 29.5 inch
• Rated Voltage: 5V, 0.35A
• Please Note: the fan has two sides,but the side with sticker must be always facing the hotend (not visible when the fan is mounted).Otherwise,the cooling won’t work properly.
• After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you.

Feature

• Package Content : 2 x DC Brushless Cooling Fan
• Bearing Type: Dual Ball Bearing, Speed: 6000 RPM, Air Flow : 3.87 CFM
• Rated Voltage: DC 12V, Current: 0.23A (0.35 Max.)
• Connector: 2 Terminal Connector with 2pin-ph2.5
• Advantage: Long Life (50000 hours) at 40 degree and Low Noise
• UL TUV approved certification. Warranty: 1 year and lifetime technical support.

Feature

• ✔️Oil bearings 5015 Blower Fan – High Speed version
• ✔️️Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
• ✔️️Rated voltage: DC 24V
• ✔️️Size: 50x50x15mm
• ✔️️Made by WINSINN

Feature

• ✔️Oil bearings 5015 Blower Fan – High Speed version
• ✔️️Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
• ✔️️Rated voltage: DC 12V
• ✔️️Size: 50x50x15mm
• ✔️️Made by WINSINN

Feature

• Package Content : 2 x DC Brushless Cooling Fan (50mm x 50mm x 15mm)
• For 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement
• Anet A8 A6 DC Cooling Fan Ultra-quiet Oil Bearing about 7500 RPM Turbo Fan For 3D Printer 5015 Blower
• Rated Voltage: DC 12V/24V, Current: 0.18A /0.17A
• Connector: 2 Terminal Connector
• Blade 5015

Feature

• Hydraulic bearings are based on oil-impregnated bearings. Hydraulic bearings have a larger oil storage space than oil-impregnated bearings and have a unique loop-back oil supply circuit.
• Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you.
• Rated Voltage: DC 12V, Current: 0.08A
• Speed: 7200RPM, Noise: 22dBA
• Air Flow: 2.8CFM。 Dimensions: 40 x 40 x 10mm(1.6 x 1.6 x 0.36inch)
• Connector: 2 Terminal Connector with 2pin-ph2.54
• Wiring: red wire is connected to positive pole, black wire is connected to negative pole
• We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Please click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to your consultation!

Feature

• Cooling Blower Fans
• DC 24V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series
• small heat radiating communication equipment
• military equipment
• intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
• pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)
• Bearing. Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5100 RPM
• Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H)
• Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″
• Mounting Spacing : 5.8cm/2.3″
• Weight : 26g
• This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
• Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5100 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sale price $11.49 Sleeve Bearing
• Sale price $14.99 Dual Ball Bearing.