
We spent many hours on research to finding 40mm rgb led fan cooling, reading product features, product specifications for this guide. For those of you who wish to the best 40mm rgb led fan cooling, you should not miss this article. 40mm rgb led fan cooling coming in a variety of types but also different price range. The following is the top 9 40mm rgb led fan cooling by our suggestions
951 reviews analysed
1. GeeekPi 2pcs Raspberry Pi 4 Quiet Fan, Raspberry Pi RGB Cooling Fan 40x40x10mm 4010 Fan DC 5V Brushless CPU Cooling Fan Cooler Radiator for Raspberry Pi 4 Model B, Raspberry Pi 3B+/3B/2B (Multicolour)
Feature
- Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+
- The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
- Fan Size: 40x40x10mm
- Package Includes: 2x Cooling Fan, 2x Screw Set.4Pack Version,please refer to Asin: B084VJ777B
- NOTE: Raspberry Pi Not Included
Description
Descriptions:
This is 4010 type fan for Raspberry Pi or other development board.
When the fan turns up, you will see 7 different color LEDs that change automatically, making your fan more beautiful and personalized.
It’s high quality and low consumption and low noise.
Used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly
It’s good for heat dissipation of Raspberry Pi.
It can be assembled easily by screws.
Features:
4010 Fan
High quality
Low consumption
Super quiet
Easy to setup
How to connect:
Connect to 5V and GND on GPIO Pins
PS: You can also move the red wire to 3V3 pin to reduce the speed of the fan.
Package Includes:
2x Cooling Fan
2x Screw Set
NOTE:
Raspberry Pi Not Included
2. upHere 120mm Computer Case Fan Rainbow LED Silent Fan for Computer Cases, CPU Coolers,Water Cooler and Radiators Ultra Quiet,3 Pack Colorful Case Fan(F03CF)
Feature
- 1.Rainbow LED effect: Dynamic Rainbow illumination effect, breathable effect and high airflow to keep your computer fresh.* The color version can realize the automatic color lighting effect, but it cannot be connected to the motherboard or the controller to control the lighting effect.
- 2.HIGH EFFICIENCY, MUTE-Combination of high efficiency heat dissipation and mute,11 pcs bionic shark fin fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, Corner breakage design of the fan vanes is to reduce the noise and increase wind pressure. In addition, the fan vanes have been polished, not easy to stick ash.
- 3.ASEISMATIC DESIGN-Silent noise reduction,That 8 damping silicone pads fixed on both sides of the fan frame is to reduce the noise of the polarization motor vibration.
- 4.Perfect Cooling Performance:Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling.
- 5.Wide Compatibility:The most commonly 120mm size for computer case.Compatible 3-pin connector for mainboard and power supply that also works with 4-pin headers.
3. 2pcs Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan DC Brushless CPU Quiet LED Cooling Fan 30mm 30mm Fan Cooler Radiator 3 to 5.8V for Raspberry Pi 4 Model B, Raspberry Pi 3B+ 3B 2B+
Feature
- 【Installation Screws Included】 Don’t need to purchase screws by yourself. Intimate service, easy to install! NOTE: The raspberry pi board is not included!!!
- 【Super Quiet】This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi other development board.
- 【Specific parameters】According to the voltage requirements in accordance with your needs to choose to use
- Rated voltage: DC 5V
- Working voltage: 3.0-5.8V
- Current: 0.2A
- Air volume: 5m³ / h
- Noise: 18 dB
- Rated voltage: DC 5V
- Number of revolutions: 13200RPM
- Mini size: 30 * 30 * 7.5 mm.
- 【Wide range of applications】Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry pi 4 Model B / 3B+ / 3B/ 2B+ / 2B
- Specially Feature: When the fan turns up, you will see Blue light.
- 【Strong After-sales Service Team】As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
Description
Product Description:
This is a 4010 blue LED fan for the Raspberry Pi, which is very cool. When the fan turns up, you will see Blue light.
Parameter
Material: Plastic
Color: Tansparent
LED color light: Blue
Rated voltage: DC 5V
Working voltage: 3.0-5.8V
Current: 0.2A
Air volume: 5m 3 / h
Speed: 13200
Noise: 18 dB
Fan size: 30 * 30 * 7.5 mm
Feature:
Suitable for Raspberry pi 4 Model B / 3B+ / 3B/ 2B+ / 2B
Low consumption and low noise
High quality, low consumption and low noise
How to connect?
The fan power is provided by GPIO.
Connect the red cable to the 5V pin and connect the black cable to the GND pin.
Package Including:
2 * LED Fan
8 * Screws
8 * Screws Nuts
4. upHere 120mm 4-Pin PWM Rainbow LED Effect Case Fan for PC Cooling,Computer Cases, CPU Coolers,Water Cooler and Radiators Ultra Quiet,3-Pack,T4CF4-3
Feature
- 1.Dynamic Rainbow Effect :Dynamic vivid Rainbow illumination effect, breathable effect and high airflow to keep your computer fresh.
- 2.Fan Blades Design:The 9 blades are designed for high-volume air delivery. They’re translucent, with a frosted texture, so the light from the LEDs adds a dramatic effect.
- 3.Long Service Life:Wear resistant hydraulic bearing construction makes the fan run noiseless and the air aolume larger with an astounding service life of more than 40,000 hours.
- 4.PWM Control:The PWM function allows the motherboard to run the fan precisely at its necessary speed. This assures the required cooling and minimises the noise level.
- 5.Two Way installation:Easy for installation.You can either blow warm air out of the case or draw cool air into your case.
5. Thermaltake Riing Plus 14 RGB TT Premium Edition 140mm Software Enabled Circular 12 Controllable LED Ring Case/Radiator Fan – Five Pack – CL-F057-PL14SW-A
Description
Thermaltake Riing Plus 14 RGB TT Premium Edition 140mm Software Enabled Circular 12 Controllable LED Ring Case/Radiator Fan – Five Pack – CL-F057-PL14SW-A
Thermaltake combines the patented gorgeous LED light with cutting-edge technology to deliver a brand new experience of using PC cooling, Thermaltake Riing Plus 14 LED RGB Radiator Fan TT Premium Edition. A 140mm high-static pressure fan with a patented 16.8 million colors LED ring and 12 controllable single LEDs, the Riing Plus 14 RGB features compression blades, hydraulic bearing and a digital fan controller, and can be controlled by the patented Riing Plus RGB Software. Cool your system with high performance Thermaltake Riing Plus 14 RGB!
Features:
- Patented LED Design: Featuring 12 controllable single LEDs, the built-in LED ring can paint your build with 16.8 million colors.
- Patented Riing Plus RGB Software & App: Monitor the fan performance, adjust the fan speeds, and customize the lighting effects for up to 80 fans with Thermaltake’s patented Riing Plus RGB Software and an exclusively designed mobile app.
- 9 Fan Blade Design: Generate higher airflow without compromising on ultra-silent operation.
- Hydraulic Bearing with Low-Noise Design: The hydraulic bearing self-lubricate feature lowers operation noise while improving thermal efficiency. The seal cap prevents lubricant leakage and extends the lifespan of the unit.
- Anti-Vibration Mounting System: In-mold injection anti-vibration rubber pads provide a hassle-free usage with 80% protection coverage for all corners.
Specification:
- Fan Dimension: 140 x 140 x 25 mm
- Interface: USB 2.0 Connectors (9 Pin)
- Fan Started Voltage: 9V
- Fan Rated Voltage: 12V & 5V
- Rated Current: Fan 0.17A (One Fan)
- Power Input: 12V – 9W ; 5V – 14.5W (Fan x 5)
- Fan Speed: 500-1400 RPM
- Max Air Pressure: 1.53 mm-H2O
- Max Air Flow: 63.19 CFM
- Noise: 27.2 dB-A
- Life Expectation: 40,000 Hrs, 25°C
- Weight: 160g
Support
Please visit our website or search “Thermaltake Support” for any assistance.
6. upHere 3-Pack 120mm 3-Pin High Airflow Quiet Edition Red LED Case Fan for PC Cases, CPU Coolers, and Radiators T3RD3-3
Feature
- Wide Compatibility:The most commonly 120mm size for computer case or radiators. Compatible 3-pin connector for mainboard and power supply that also works with 4-pin headers.
- Perfect Cooling Performance:Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling.
- Fan Blades Design:The 9 blades are designed for high-volume air delivery. They’re translucent, with a frosted texture, so the light from the LEDs adds a dramatic effect.
- Long Service Life:Wear resistant hydraulic bearing construction makes the fan run noiseless and the air aolume larger with an astounding service life of more than 40,000 hours.
- Two Way installation:Easy for installation.You can either blow warm air out of the case or draw cool air into your case.
7. Cooler Master Sleeve Bearing 80mm Silent Fan for Computer Cases and CPU Coolers
Feature
- Recommended for CM 690 / 590 / 690 II
- Efficient 11-blade fan design for increased cooling at lower speeds
- 24.2 CFM Higher airflow to enhance cooling performance
- Silent operation at 20 dB-A for excellent case cooling
- RoHS compliance for protecting the environment
- Recommended for CM 690 / 590 / 690 II. 3 pin Connector. 2000 R.P.M. ± 10% Speed (R.P.M.)
- Efficient 11-blade fan design for increased cooling at lower speeds
- 24.2 CFM Higher airflow to enhance cooling performance
- Silent operation at 20 dB-A for excellent case cooling
- RoHS compliance for protecting the environment
Description
The 80mm slim fan is designed for special application spot cooling in Cooler Master chassis. These slim fans are low profile and designed to fit better in CM 690, CM 590 and CM 690 II Advanced and Basic models.
8. GeeekPi 4pcs Raspberry Pi 4 Quiet Fan, Raspberry Pi Cooling Fan 40x40x10mm 4010 Fan DC 5V Brushless CPU Cooling Fan Cooler Radiator for Raspberry Pi 4 Model B, Raspberry Pi 3B+/3B/2B (Multi-Colored)
Feature
- Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+
- The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
- Fan Size: 40x40x10mm, Color: RGB Multicolored Light
- Package Includes: 4x Cooling Fan, 4x Screw Set.2Pack Version,please refer to Asin:B082X1W7M5
- NOTE: Raspberry Pi Not Included
Description
Descriptions:
This is 4010 type fan for Raspberry Pi or other development board.
When the fan turns up, you will see 7 different color LEDs that change automatically, making your fan more beautiful and personalized.
It’s high quality and low consumption and low noise.
Used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly
It’s good for heat dissipation of Raspberry Pi.
It can be assembled easily by screws.
Features:
4010 Fan
High quality
Low consumption
Super quiet
Easy to setup
How to connect:
Connect to 5V and GND on GPIO Pins
PS: You can also move the red wire to 3V3 pin to reduce the speed of the fan.
Package Includes:
2x Cooling Fan
2x Screw Set
NOTE:
Raspberry Pi Not Included
9. Intel 40x40x20MM Blue LED Fan
Description
Premier Grade AVC OEM for INTEL Model: DASA0420R2M, Middle Speed with Blue LED Light
Conclusion
By our suggestions above, we hope that you can found 40Mm Rgb Led Fan Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!