642 reviews analysed
1. Joyway 3/8" ID Hose Barb, Y Shaped Type 3 Way Union Intersection/Split Brass Shut Off Ball Valve Fitting
- Attention:This is the first generation of products, there are some defects in the design, if you have higher requirements for leakage, please ORDER:B07HRXLS8B,then CHOOSE AY3/8L size.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Temperatures range from -40 to 160 F
- Connections: Hose Barb x Hose Barb x Hose Barb
- Y 3-Way Shut off Ball Valve great fit for ATV.
This Joyway Y hose fitting is made of forged brass and connects and branches three hoses. This fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included). It is made of forged brass for greater strength than cast brass. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
2. BBT Check Valve, 2Pcs 3/8" 10mm Inline ABS One Way Water Non Return Check Valve for Fuel Gas Liquid Air
- Material ※ The shell material is ABS resin, and the Diaphragm material is silicon rubber
- Performance※ Normal performance under 25 ℃ to 60 ℃,Strong resistance to acid, alkali, salt corrosion ability
- Application ※Check valve is used in fluid system to prevent reverse flow fluid, or used in pneumatic system to prevent reverse flow of compressed air
- Diameter ※ 10mm/0.39 inch
- Total length ※ 43mm/1.69 inch
3. Da by Hose Barb Ball Valve 3/8" Brass Fitting Y Shaped 2 Switch 3 Way Connector(for Hose ID 10mm-11mm)
- Package Include: 1 Y Shaped 58Brass barb ball valve with 3 way union barb outer diameter about 10mm x 10mm x 10mm. 3 Stainless steel pipe clamps fit hose outer diameter of 13-19 mm.
- Material: Ball valve made of 58 brass(not pure copper),It’s color is light yellow brown, Pipe clamps all components are all made of 304 stainless steel and will not rust.
- Solid Connections:Barb can be connected to the hose（Fit hose witch inner diameter of 10-11mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose.Heavy 3 way brass barb ball valve and thickened wall, higher strength and very rugged.
- Characteristic: Y shaped 3-way shut off ball valve has 2 switchs which can control 2 channels respectively. It for corrosion resistance, and will not rust, super sturdy.
- Note: The main material of this three-way valve is 58 copper.It’s color is light yellow brown, and the color will turn more yellow after oxidation.
4. 4 Pcs 10mm 3/8 inches Inline ABS One Way Water Non Return Check Valve for Fuel Gas Liquid Air
- ✅Shell material: ABS resin, Diaphragm material: silicon rubber
- ✅Diameter: 10mm/0.39 inch； Total Length: 43mm/1.69 inch
- ✅Strong resistance to acid, alkali, salt corrosion ability.Medical grade material, safe and nontoxic
- ✅Normal performance under 25 ℃ to 60 ℃
- ✅Application：Check valve is used in fluid system to prevent reverse flow fluid, or used in pneumatic system to prevent reverse flow of compressed air
5. One Way Non Return Check Valve (10mm 3/8" Aluminum Alloy)
- ❤PURPOS: Prevents fuel from returning back to the tank and keeps it in the line
- ❤APPLICATION: Can be used as a tank check valve for small compressors or as a component in pneumatic circuits.
- ❤HIGH QUALITY MATERIAL: Made of high quality aluminum alloy,contains stainless steel spring and chloroether valve (oil resistance is three times that of nitrile).
- ❤NOTE: Suitable for diesel, gasoline, water, etc. (not for methanol, because methanol is energized to produce formic acid, corrosive to the inside of the product.)
- ❤SIZE: 6/10/12mm(Optional), 3 different sizes are available, will meet your need.
6. Beduan 2 Way Normally Closed DC 12V Electric Solenoid Air Valve 1/8" NPT
- 【Material】Anodized Aluminum
- 【Valve Type】2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing.
- 【Port Coil Voltage】 12V Port size: 1/8″ Female. One side 1/8″ inlet port, other side 1/8″ outlet port.
- 【Temperature Range】 23-176°F , Pressure Range : 115 PSI
- 【Feature】This solenoid valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
Model Number : 2ACK-1/4-12VDC-G
Valve Type : 2 Way Normally Closed (Valve opens with energized)
Service Media : Air- Gas- Liquid- Water
Operation Model : Direct Acting
Flow Model : Uni-Directional
Flow Rate : 0.23Cv (Fluid Flow)- 22 SCFM at 100 PSI (Air Flow)
Response Time : Less than 20 ms
Body Material : Anodized Aluminum
Seal Material : NBR (Buna N) Armature
Tube Material : Brass
Plunger & Spring Material : Stainless Steel
Coil Certification : CE Certification
Coil Power : 6.5W
Coil Class : F Class IP 65 (CE Certification)
Coil Duty : 100% ED (Continuous Duty)
Operating Pressure : Vacuum to 115 PSI
Operating Temperature : -5 to 80 °C
Port Size : 1/4″ Inch NPT Female
Port Coil Voltage : 12V DC
Voltage Tolerances : DC : +10% –5% ; AC : +10% -15%
Electrical Connection : Grommet Coil with 12″ Lead Wire 2ACK Series Electric Solenoid Valve
7. 1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve
8. EVIL ENERGY 3/8" 10mm Non Return One Way Check Valve for Fuel Line Oil Petrol Diesel Aluminium Silver Pack of 2
- Function: The basic design of a one way check valve inhibits back flow in a line. Arrow marked on valve, showing fluid flow direction, preventing fuel from returning back to the tank and keeps it in the line. In this way, this product can perfectly solve the problem that your vehicle is hard or slow starting issues
- Feature: The non return check valve body is made of high quality aluminum alloy can use longer than plastic one. Stable characteristics, high reliability. The push lock design of the connector stop the hose from sliding off and easy to connect. Surface anodized for great appearance and anti-corrosion, superior thread strength
- One-way Check valve installs in many diesel / bio fuel systems / Carburetors and low pressure fuel systems where you desire fuel to only flow one way. Suitable for water, petrol, diesel, oil, and other fluids. Note:This fuel non return one way check valve cannot be used in methyl alcohol because formic acid will be produced while it is powered on, which will lead to the uselessness
- Easy installation and replacement. According to the little arrow on the valve, connect the fuel line. You can use some hose clamps which can make sure the pipes don’t drop off. The main advantage of a non-return check valve is its simple design. This simple design make the check valves has a small size and easy to install, making maintenance easier and more efficient
- The minimum upstream pressure required to operate the aluminum one-way check valve is 2.9psi (0.2 bar). Working pressure:2.9-87 psi (0.2-6bar) Operating temperature: -30 ℃ – 130 ℃. Six-month warranty provide by EVIL ENERGY. We value your shopping experience and strive to offer a high-quality product and service
9. Baomain Pneumatic Solenoid Air Valve 4V230C-08 DC 12V 5 Way 3 Position PT1/4" Internally Piloted Acting Type Double Electrical Control Midst Closed
- Model: 4V230C-08
- Operation Type: Internally Piloted Acting Type
- Type: 3 Position 5 Way
- Working Voltage/Power: DC12V
- Operating Pressure: 0.15-0.8MPa
- Port Connection: Air Inlet =Air Outlet=PT 1/4, Exaust =PT 1/8
- AirInlet Diameter: 11.5mm/ 0.45″
- Hex Connector Inner Dia(Approx): 9.5mm / 0.37″
- Total Size(Approx): 190 x 65 x 22mm / 7.5″ x 2.6″ x 0.9″ (L*W*H)
- Weight: 355g
- Package Content: 1 x Solenoid Valve
10. NAVARME 3 PCS 6MM Non-Return One Way 1/4 Inch Air Fuel Oil Check Valve Diesel Gas
Fit for Carburettor and low pressure fuel systems
3 x Non Return One Way Check Valve
Material: High Quality Aluminum Color: chrome Condition: 100% Brand New Quantity:1 pc Size: 10mm Function: prevents fuel from returning back to the tank and keeps it in the line.
By our suggestions above, we hope that you can found 3Way Vacuum Valve for you.Please don’t forget to share your experience by comment in this post. Thank you!